Table of Contents
Advertisement
Hookups With a Cable Box/Direct Br0adc_S_em(cant'd) _9
With this connection:
.....
"
:
• You may watch one channelwhile recording another. "
• You may not record scrambledchannels.
i
VCR
Cable Box/DBS
Cable signal
ml_
TV's
•
_I
ANTENNA
RF coaxial cable
IN jack
RF coaxialcable
Connections
I
Connect a Cable signalto the VCR'sANT(enna) IN jack.
2
Use an RF coaxialcable (supplied)to connectthe RF OUT jack on
theVCR to the IN jack on the Cable Box/DBS.
3
Use a secondRF coaxialcable to connectthe OUT jack on the
Cable Box/DBSto the TV'sANTENNA IN jack.
Recording
One Channel/Watching
Another
i
_..
Put the Cable Box/DBSon the same channelas theVCR's
CH3/CH4 switch.Then,with the VCR inVCR position (theVCR
light will appearon the display panel),use the CH(annel) A/V but-
tons to selectthe channelyou want to record at theVCR. Start
the recording.
2
Press theVCRJ-rV
button once to put theVCR
in'IV
position.
(The VCR light will disappear.)
3
Set the'IV to the Cable Box/DBSoutput channel(03 or 04).
4
Selectthe channelyou want to watch at the Cable Box/DBS.
When youplaya tape,make sure
• e CableBoxlDBS isset to the
samechannel a s _e CH3/CH'/
switch on _he VCR.Set_e"lV to the
CableBox/DBS outputchannel(0.3
or 0#).
Advertisement
Table of Contents
