Philips VRZ364AT Owner's Manual page 34

34 Setting U ptheY'CR P lus+ PrOgramming System (cont'd)
2
Now, compare the channel numbers you have written into the
VCR PLUS+ CH. and CABLFJTV CH. columns.You'll notice that
some stations haveVCRplus+ and CableJ'W channel numbers that
are the same, and other stations have channel numbers that do
not match.You must tell theVCR Plus+ and CableJTV channel
numbers according to the following steps.
3 •
Press theVCR button, then press the MENU button.
4
Press the PLAY • or STOP • button to select INITIAL
SET UP, then press the FF I_IOK button.
5
Press the PLAY • or STOP • button to selectVCR
PLUS+ CH., then press the FF I_IOK button.
VCR99_US+ CABLE/TV
SELECT &V OP. EN_=R VCR+
CH. NO.THEN FtJSH I_/OK
END PUSH EXIT J
6
While theVCR PLUS+ channel is flashing, press the PLAY
• or STOP • button repeatedly or press the Number
buttons to select a VCR PLUS+ channel number. The arrow
will appear beside theVCR PLUS+ channel. Press the FF I_IOK
button.
Examine the lists on page 32.
8
7
While the space for the CABLEJTV channel is flashing,
press the PLAY • or STOP • button repeatedly or press
the Number buttons to enter the CABLE/TV channel
number. Press the FF I_IOK button.
Repeat steps6 - 7 until you haveentered all the channels on your
list.
8
Press the EXITISTATUS button.