Table of Contents
Advertisement
Operation, cont'd
Viewing a configuration
The current configuration can be viewed using the front panel buttons. The
View-only mode prevents inadvertent changes to the current configuration.
View-only mode also provides a way to mute video and audio outputs
(see "Muting and unmuting video and/or audio outputs" on page 3-29.
View the current configuration as follows:
1.
2.
3.
4.
N •
3-16
MVX Plus 128 VGA A Matrix Switcher • Operation
Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
Press and release the View button. All of the buttons light for outputs that are
not tied as follows:
•
Amber: No tied video or audio input
•
Green: No tied video input
•
Red: No tied audio input
Select video, audio, or both to view by pressing the RGBHV button and/or
the Audio button.
Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
When you enter View-only mode, the output buttons light for all outputs
without ties. Likewise, when you press an output button for which there are
no ties, the output buttons light for all outputs without ties.
•
To see all ties of the current configuration, press and release each input and
output button, one at a time, with the RGBHV button and the Audio button
lit.
•
In View-only mode, you can view video and audio, video-only, or audio-
only ties. Pressing and releasing the RGBHV button and the Audio button
toggles each selection on and off.
•
When you view video and audio ties, the RGBHV button is lit green and
the Audio button is lit red. After you select an input or output, the output
buttons light different colors to show where video and audio ties are not the
same (audio is broken away). Amber = video and audio, green = video only,
and red = audio only.
•
After 30 seconds of front panel inactivity, View-only mode automatically
deselects.
Advertisement
Table of Contents
