Front Panel Controls And Indicators; Definitions - Extron electronics MVX Plus 128 VGA A User Manual

Computer video (vga) and audio matrix switcher
Table of Contents

Advertisement

Operation

Front Panel Controls and Indicators

The front panel controls (figure 3-1) are grouped into two sets. The input and
output buttons are grouped on the left side of the control panel. The control
buttons and video/audio (I/O) selection buttons are grouped on the right side of
the panel.
1
2
Figure 3-1 — Front panel, MVX Plus 128 VGA A
The large, illuminated pushbuttons can be labeled with text and/or graphics. The
buttons can be set to provide amber background illumination all the time or the
background illumination can be turned off (see "Background illumination", on
page 3-43. The buttons blink or are lit at full intensity (depending on the operation)
when selected.

Definitions

The following terms, which apply to Extron matrix switchers, are used throughout
this manual:
Tie — An input-to-output connection.
Set of ties — An input tied to two or more outputs. (An output can never be tied
Configuration — One or more ties or one or more sets of ties.
Current configuration — The configuration that is currently active in the
Global memory preset — A configuration that has been stored. Up to 32 global
Room — A subset of outputs that are logically related to each other, as
Room memory preset — A configuration consisting of outputs in a single room
3-2
MVX Plus 128 VGA A Matrix Switcher • Operation
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8
OUTPUTS
to more than one input.)
switcher (also called configuration 0)
memory presets can be stored in memory. Preset locations are assigned to the
input buttons and output buttons. When a preset is retrieved from memory,
it becomes the current configuration.
The switchers have 32 presets. Up to 20 presets can be selected from the
front panel for either saving or retrieving. Preset numbers larger than 20 are
accessible via serial port or LAN port control.
determined by the operator. The switchers support up to 10 rooms, each of
which can consist of from 1 to 16 outputs.
that has been stored. When a room preset is retrieved from memory, it
becomes the current configuration.
CONFIG
CONTROL
I/O
AUDIO
ENTER
PRESET
VIEW
ESC
VIDEO
MVX PLUS SERIES
VGA MATRIX SWITCHER
IP LINK™
WITH
3
4
5
6
7
8

Advertisement

Table of Contents
loading

Table of Contents