Viewing A Configuration - Extron electronics DXP DVI Pro User Manual

5.
The configuration now is:
•
•
•
Figure 29.

Viewing a Configuration

You can view the current set of video and audio ties using the front panel buttons. The
view-only mode prevents inadvertent changes to the current configuration. View-only
mode also provides a way to mute outputs (see
Audio
View the current configuration as follows:
1.
2.
3.
Press and release the Enter button.
Press the Enter button to
confirm the configuration
change.
All input and output buttons
become unlit or return to
ENTER
background illumination.
The Enter button
becomes unlit or returns to
background illumination.
Figure 28.
Confirm the Tie Removal
Input 5 video tied to output 1, output 3, and output 8
Input 5 audio tied to output 3 and output 8
Input 5 video and audio tied to output 3 and output 8
Example 3, Final Configuration
Outputs" on page 34).
Press the Esc button to clear any remaining input, output, or control button selections.
Press and release the View button. All output buttons that are not tied light as
follows:
Amber: No tied video or audio input
•
Green: No tied video input
•
Red: No tied audio input
•
Select video, audio, or both to view by pressing the Video and Audio buttons.
"Muting and Unmuting Video and
DXP DVI Pro and DXP HDMI Series • Operation 24