Table of Contents
Advertisement
Matrix Software, cont'd
Hardware status — Provides an overall view of the status of the matrix switcher,
Figure 5-14 — Status window
Name presets — Allows you to assign a name to each of the 32 memory presets.
N Preset names are limited to 12 upper- and lower-case alphanumeric characters,
N The following characters are invalid in preset names:
Show RS-232 strings — Displays the ASCII commands that are used by the
I/O group settings — Allows you to establish I/O groups.
Room configuration — Allows you to assign outputs to rooms or delete outputs
N A Room is a subset of outputs that are logically related to each other, as
Initialize — Initializes and clears any or all of the following: ties, presets, audio
Preferences menu
Immediate changes — Causes configuration changes to take
Hold/verify changes — Delays implementation of
Ties as lines — Displays ties as lines (figure 5-15).
Figure 5-15 — Ties shown as lines
5-20
MVX Plus 128 VGA A Matrix Switcher • Matrix Software
including the power supply voltages, the temperature status, the rear panel
Remote RS-232/RS-422 port configuration, and the installed and updated
firmware status (figure 5-14).
space, and the _ and / characters.
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
current configuration. You can refer to these for RS-232 programming.
from rooms.
determined by the operator. The MVX Plus 128 VGA A switcher supports up to
10 rooms, each of which can consist of from 1 to 16 outputs.
configuration, preset names, icon names, and icons.
effect immediately.
configuration changes until the Changes – Take button
is pressed.
Advertisement
Table of Contents
