Appendix B • Specifications, Part Numbers, Accessories; Specifications - Extron electronics MVX Plus 128 VGA A User Manual

Specifications, Part Numbers, Accessories

Specifications

Video
Routing ........................................... 12 x 8 matrix
Gain ................................................ Unity
Bandwidth . ..................................... 300 MHz (-3 dB), fully loaded
Crosstalk . ........................................ -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed ............................ 200 ns (max.)
Video input
Number/signal type . .................... 12 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
Connectors ..................................... 12 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels . ....... Analog: 0.5 V to 2.0 Vp-p with no offset
Horizontal frequency . .................. 15 kHz to 150 kHz
Vertical frequency . ........................ 30 Hz to 150 Hz
Impedance . .................................... 75 ohms
Return loss . .................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video output
Number/signal type . .................... 8 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
Connectors ..................................... 8 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels . ....... 0 V to 2.0 Vp-p (follows input)
Impedance . .................................... 75 ohms
Return loss . .................................... <-30 dB @ 5 MHz
DC offset . ....................................... ±10 mV with input at 0 offset
Sync
Input type . ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type . ................................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ..................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level .................................. AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ........................ 75 ohms
Max input voltage ........................ 5.0 Vp-p
Max. propagation delay ............... 30 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
B B-2 MVX Plus 128 VGA A Matrix Switcher • Specifications, Part Numbers, Accessories
0 - 10 MHz .................. no more than +0.1 dB to -0.1 dB
0 - 130 MHz ................ no more than +0.8 dB to -0.8 dB
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video