Table of Contents
Advertisement
Matrix Software, cont'd
Master-Reset selection
Master reset clears all ties and presets, all video and audio mutes, resets all I/O
grouping, sets all input audio levels to unity gain (+0 dB), and sets all output
volume levels to 100% (0 dB of attenuation).
N Master reset does not reset the Internet protocol (IP) settings.
Using Emulation mode
Emulation mode allows you to set up the software without attaching the switcher
to the computer. To use Emulation mode, do the following:
1.
2.
3.
4.
5.
6.
Using the help system
For information about program features, you can access the help program in any of
the following ways:
• From the Extron Electronics program folder or group, double-
• From within the Matrix Switcher Control Program, click on the
• From within the Matrix Switcher Control Program, press the F1 key.
Special Characters
The HTML language reserves certain characters for specific functions. The switcher
does not accept these characters as part of preset names, the switcher's name,
passwords, or locally created file names.
The switcher rejects the following characters:
{space (spaces are ok for names)} + ~ , @ = ' [ ] { } < > ' " semicolon (;) colon
(:) | \ and ?.
5-22
MVX Plus 128 VGA A Matrix Switcher • Matrix Software
Double-click the MATRIX Switchers+ Control Program icon in the Extron
Electronics group or folder.
Choose Emulate, and click OK.
Choose an Emulation file to open, and click OK. The file DEMO.MTX
provides a sample of a completed matrix setup. Selecting the file NEW.INI or
clicking Cancel provides a blank setup to get you started.
Enter the file name under which you want to save any changes to the file, and
click OK.
Select the number of video boards, audio boards, and matrix model for which
you are preparing a configuration, and click OK.
Continue using the program as described on page 5-6.
click on the MATRIX Switchers Help icon (shown at right).
Help menu on the main screen.
Advertisement
Table of Contents
