Table of Contents
Advertisement
im Vertrieb von
Viewing a configuration
www.camboard.de
CAMBOARD Electronics
The current configuration can be viewed using the front panel buttons. The View-
Only mode prevents inadvertent changes to the current configuration. View-Only
mode also provides a way to mute video and audio outputs (see Muting and
unmuting video and/or audio outputs on page 3-31.
View the current configuration as follows:
1.
Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
2.
Press and release the View button. All of the buttons for outputs that are not
tied light:
•
Amber: No tied video or audio input
•
Green: No tied video input
•
Red: No tied audio input
3.
Select video, audio, or both to view by pressing the RGBHV
(CrossPoint 450 Plus switchers) or Video (MAV Plus switchers) button and/or
the Audio button.
4.
Select the desired input or output(s) whose ties you wish to view by pressing
the input and output buttons.
•
When you enter View-Only mode, the output buttons light for all
outputs without ties. Likewise, when an output button for which there are
no ties is pushed, the output buttons turn on for all outputs without ties.
•
To see all ties of the current configuration, press and release each input
and output button, one at a time, with the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus switchers) button and the Audio button
lit.
•
In View-Only mode, you can view video and audio, video-only, or audio-
only ties. Pressing and releasing the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus switchers) button and the Audio button
toggles each on and off.
•
When you view video and audio ties, the RGBHV (CrossPoint 450 Plus
switchers) or Video (MAV Plus switchers) button is lit green and the
Audio button is lit red. After you select an input or output, the output
buttons light different colors to show where video and audio ties are not
the same (audio is broken away). Amber = video and audio, green = video
only, and red = audio only.
Tel. 07131 911201
CrossPoint 450 Plus and MAV Plus Switchers • Operation
Fax 07131 911203
ce-info@camboard.de
3-17
Advertisement
Table of Contents
