Chapter 3 Saving The Tones You Have Created; Write; Copying Patches - Boss GT-6B Owner's Manual

Chapter 3 Saving the Tones You Have Created

Write

When you want to save a tone created, or a tone for which
changes have been made, use the Write procedure to save the
tone to a User patch.
* The newly created tone will be discarded if the power is turned
off, or if the tone is switched ("How to Switch Patches'; p. 14)
before you've carried out the Write procedure.
fig.03-01
1. Press [WRITE].
The content of the display changes, and the GT-6B is
ready for a patch to be specified as the save destination.
fig.03-02
2. Rotate the VALUE dial to select the save-destination
patch.
* Only User patches can be selected as the save destination.
* This step is unnecessary if the current patch may be used.
* To cancel the Write procedure, press [EXIT]. The Play screen
returns to the display.
3. Press [WRITE] once more.
The tone is saved to the save-destination patch, and the
Play screen returns to the display.
* The sound of the patch previously stored at the save-
destination is permanently deleted once the write is executed.
2
1,3
Destination Patch

Copying Patches

You can copy a Preset or User patch to another User patch.
fig.03-03
1. Select the copy-source patch (refer to "How to Switch
Patches"; p. 14).
2. Press [WRITE].
The content of the display changes, and the GT-6B is
ready for a User patch to be specified as the copy
destination.
fig.03-04
3. Rotate the VALUE dial to select the copy-destination
patch.
* To cancel the copy, press [EXIT]. The Play screen returns to
the display.
4. Press [WRITE] once more.
The GT-6B copies a tone to the copy-destination patch,
and you're returned to the Play screen.
* The sound of the patch previously stored at the copy
destination is permanently deleted once the write is executed.
3
2,4
Destination Patch
23