Installing & Setup The Usb Driver - Boss GS-10 Owner's Manual

Installing & Setup the USB Driver
In order to use the GS-10 USB, you must first install the USB driver.
The USB Driver is included in the "GS-10 SOFTWARE CD-ROM."
■ What is USB Driver?
The USB Driver is software which passes data between the GS-10 and the application (sequencer software
etc.) that is running on the USB-connected computer.
The GS-10 Driver sends data from the application to the GS-10, and passes data from the GS-10 to the
application.
The GS-10 can receive and transmit both digital audio signals and MIDI messages.
Application
USB connector
USB
Driver
USB cable
Computer GS-10
The explanation about installing and setup the driver is organized according to the computer and driver
mode that you are using. Please proceed to the following pages.
Installing & Setting Up the Driver (Windows) ............................... (p. 92)
Installing & Setting Up the Driver (Macintosh) ........................... (p. 112)
91