Nortel 1000 Fundamentals page 211

Prompt
>
>
>
>
>
>
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
Response
SIPCTITraceLevel
<level>
SIPCTITrace on
SIPCTITrace off
SIPCTITrace
<MsgRcv>
<MsgSend>
SIPCTITrace sc
<soft client SIP/Tel
URI/DN> <MsgRcv
><MsgSend>
SIPCTIOutput
<Dest> <"fileName">
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Remote Call Control 211
Description
Configure the TR87 SIP message
Trace Level. The level can be
one of the following:
0 –TR87 SIP message body
(ECMA 323) only
1 – TR87 SIP message body
(ECMA 323) and message
headers
Turn on SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
Turn off SIP CTI trace for all
soft clients in both incoming and
outgoing directions.
Turn on SIP CTI trace for all
soft clients in incoming and/or
outgoing. The parameter is either
on or off.
Turn on SIP CTI trace for a
specific soft client in incoming
and/or outgoing direction(s).
This may result in a number of
sessions as a single URI could be
used for multiple active sessions.
Redirecting the SIP CTI trace to
a specific output destination.
The destination can be one of the
following:
1. TTY
2. RPTLOG
3. File
If File is selected as the output
destination, the filename must be
given.