Nortel 1000 Fundamentals page 144

144 Configuration
Figure 47
Element Manager SIP URI MAP
Active Directory configuration section There are two modes for Active
Directory (AD) Configuration: Realtime or Local Cache. Realtime mode
is used for end-user ID mapping, which requires a Lightweight Directory
Access Protocol (LDAP) query. Local Cache mode involves caching the
Active Directory on the MCM server and using that cache information for
queries.
Table 28
Active Directory configuration
Configuration Field
Query server
Local Cache
Local Cache then Query Server
Non default AD/LDAP Server
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
Description
Use this field for real-time LDAP AD queries.
AD queries are done to a local cache of
the AD. The cache is synchronized daily at
a preconfigured time. You can force it to
synchronize by clicking the Synchronize Now
button to start
AD queries are done to a local cached of the AD.
If the entry is not found in the local cache then
the MCM queries the LDAP AD in real-time.
IP address and port of the LDAP server to be
used if different from the default AD/LDAP server.
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008