Remote Call Control - Nortel 1000 Fundamentals

210 Maintenance
Patches and upgrades
Patching is not supported in MCM 3.0 .. Fixes are provided in up-issues
and maintenance releases.
Software upgrades install the new application and use or upgrade the
existing configuration file. MCM 3.0 is delivered on a CD and available for
download from the Nortel Web site www.nortel.com.
All customer configured MCM application data is retained during an MCM
application upgrade.

Remote Call Control

Signaling Server OAM Level CLI Commands
The Signaling Server OAM Level CLI commands are used to query active
TR/87 sessions to turn on tracing at the SIP level. You can use these
commands to terminate either a session for a specific DN or to terminate all
TR/87 sessions that are currently active on the server.
Table 37
Signaling Server OAM Level CLI commands
Prompt
>
>
>
>
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
SIP tracing can be filtered by DN number. MCM SIP tracing is
implemented as part of the application logging functionality. Special
commands are not required. For more information on tracing, see
Capturing traces and logs
— You can remotely access the Office Communications Server
application using the Windows 2003 server remote access capability.
— Task Manager is supported in Windows 2003 Server for MCM.
Response
SIPCTISessionShow
SIPCTITraceShow
SIPCTIShow
SIPCTIClientShow
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
ATTENTION
Description
Show the total number of TR87
SIP sessions.
Display the trace settings for
SIP CTI application, including
the trace filter setting and output
setting.
Show SIP CTI application status
and configuration.
Show information about the all
the soft clients associated.