Nortel 1000 Fundamentals page 178

178 Configuration
Node parameter configuration
The node IP is the IP address of the TR/87 FE:
•
•
When you add additional nodes to balance TR/87 load, SIP routing must be
configured so that all clients that attempt to control a DN terminate on the same
node.
The TR/87 FE application can run within a TPS node as well as a non-TPS
node as shown in
Figure 63
TR/87 Node configuration
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
You can configure multiple nodes to support TR/87 applications
for additional capacity. The Remote Call Control SIP URI of users
determines which node they use.
An AML restriction dictates that only one application can acquire a given
DN on a Call Server.
Figure 63 "TR/87 Node configuration" (page
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
ATTENTION
178).