Nortel 1000 Fundamentals page 183

Parameter: Maximum Associations Per DN
This parameter defines the maximum number of simultaneous TR/87 SIP
dialogs that can be active for a single DN. Multiple instances of Office
Communicator (for example, home, office, laptop) are active and each of
them can have its own active TR/87 session. This parameter limits the
number of simultaneous client sessions for a single DN.
Parameter: International Calls As National
This parameter is used in combination with the following parameters:
•
•
•
When enabled this feature monitors all SIP CTI calls made using the E.164
international number format. For E.164 called numbers that are within the
local country the SIP CTI national dial prefix is used to originate the call from
the Call Server. For E.164 called numbers that are outside the local country
the international dial prefix is used to originate the call from the Call Server.
When this feature is disabled all SIP CTI calls made using the E.164
number format uses the international dial prefix when originating the call
from the Call Server.
Two scenarios are provided using the following example parameters:
•
•
•
•
•
Scenario 1 A call is placed from Office Communicator to +14167008000.
The TR/87 Front End application on the Signaling Server uses the above
SIP CTI settings to determine that the E.164 destination is within the local
country. The call originates through AML from the Call Server using the
national dial string 614167008000.
Scenario 2 A call is placed from Office Communicator to +31123456789.
The TR/87 Front End application on the Signaling Server uses the preceding
SIP CTI settings to determine that the E.164 destination is not within the
local country. The call originates through AML from the Call Server using
the international dial string 601131123456789.
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
SIP CTI Dial Plan Prefix - National Prefix
SIP CTI Dial Plan Prefix - International Prefix
SIP CTI CLID Parameters - Country Code
SIP CTI Settings - International Calls As National = Enabled
SIP CTI Dial Plan Prefix - National Prefix = 61
SIP CTI Dial Plan Prefix - International Prefix = 6011
SIP CTI CLID Parameters - Country Code - 1
AC1 = 6
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
Remote Call Control configuration 183