Nortel 1000 Fundamentals page 116

116 Configuration
9
10
11
12
Nortel Converged Office Fundamentals — Microsoft Office Communications Server 2007
Copyright © 2005–2008, Nortel Networks
.
For enabling Remote Call Control only, select Enable Remote Call
Control and configure the Server URI and Line URI. See
"Enable Remote call control" (page
For enabling Enterprise Voice and PBX integration only (without
RCC), select Enable Enterprise Voice and the Enable PBX
integration check box. See
and PBX integration" (page
For enabling both Remote call control and Enterprise Voice,
you must select Enable Enterprise Voice and the Enable PBX
integration check box and specify the Server URI. See
"Enable both RCC and Enterprise Voice" (page
Specify the MCM/App Proxy FQDN in the Server URI field. This
must be in the format of sip:CDP or UDP;phone-context=CDP
domain or UDP domain@MCM/APP Proxy FQDN. For example:
•
Sip:5001;phone-context=cdp.udp@proxy.ocs2007.corp.nor-
tel.com – CDP format
• Sip:3435001;phone-context=udp@proxy.ocs2007.corp.nor-
tel.com – UDP format
Specify the URI of the user's telephone in the Line URI field. The
Line URI must be in the format tel:E164;ext=CDP or UDP. For
example:
• tel:+16139675000;ext=5001 – CDP format
• tel:+16139675000;ext=3435001– UDP format.
It is important to note that the chosen numbering plan must be applied to
the PCA and MCM configurations.
Nortel Communication Server 1000
NN43001-121 01.03 Standard
Release 5.0 30 April 2008
117).
Figure 34 "Enable Enterprise Voice
118).
ATTENTION
—End—
Figure 33
Figure 35
119).