Table 220 Set All Prio WWN Operation
Item
AllPriority
Threshold
Mode
Set Ctrl Kind Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Ctrl Kind,Kind=WWN,Normal end,,,
Seq.=xxxxx
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set Ctrl Kind
Set Ctrl Kind operation
Kind=WWN
WWN is selected as the parameter. The operation uses the following parameters, as shown in
Table 221 (page
Table 221 Parameters for Set Ctrl Kind Operation
Parameter
Port
All Port
WWN
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295).
Set Priority (Prio) Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Prio Port,,Normal end,,,
Seq.=xxxxx +{Port,Priority,Use,Threshold/Upper Limit,Mode}=[{1A,Non-Prio,
Enable,XXXXXXXX,IOPS},{3A,Prio,Disable,,}],Num. of Ports=2
[Perf Ctrl]
XP Performance Control (Perf Ctrl) function
Set Prio Port
Set Prio Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
182 XP Performance Control (Perf Ctrl) Function
Description
The setting status of the All Thresholds value in the WWN tab
Enable: All Thresholds value is set
Disable: All Thresholds value is cancelled
The All Thresholds value set.
This value is output only when the All Thresholds value is set
The rate type of the All Thresholds value.
IOPS: I/O rate, KB/s: Transfer rate
This value is output only when the All Thresholds value is set.
182).
Description
Port Control is applied without the All Thresholds value being set.
Port Control is applied with the All Thresholds value being set.
WWN Control is applied. This value is output whether the All Thresholds value is set or
not.