Install Cv Operation - HP XP20000/XP24000 Reference Manual

Install function
Install
Install operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 128 Install Operation (Installing Additional Battery)
Item
Power Lost Mode
Battery
Num. of Batteries

Install CV Operation

This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install CV,,Normal end,,,Seq.=xxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID}=[{1-1-(1),
0x00:0x00:0x00,
-,OPEN-V,10000,LBA,Disable,0x0005}],Num. of LDEVs=1
[Install]
Install function
Install CV
Install CV operation
No parameter
No parameter is selected in the above example. This operation uses the following parameters, as
shown in Table 129 (page
Table 129 Parameters for Install CV Operation
Parameter
No parameter
Non Format
Progress Close
Quick Format
Quick Format Close
NOTE: No parameters are selected for any case other than those described in this table.
Normal end
The operation has ended normally.
Description
The operation when power supply is lost.
Memory Backup Mode: Set to Memory Backup Mode
Destage Mode: Set to Destage Mode
The mounting location of the battery
The number of batteries.
125).
Description
Formatted Install CV.
Unformatted Install CV.
The progress window of LDEV format is closed.
Quick Format is selected
The progress window of preparing for Quick Format is closed.
Table 128 (page 125).
Install CV Operation 125