HP XP20000/XP24000 Reference Manual page 209

The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 256 Add Pair Operation
Item Description
M-VOL The LDKC, CU, and LDEV numbers of the volume specified to the main volume when
(LDKC:CU:LDEV) the pair is created
R-VOL (LDEV) The LDEV number of the volume specified to the remote volume when the pair is created
S/N The serial number of the device
LDKC The LDKC number of the paired LDKC
SSID Indicates SSID
Controller ID The controller ID.
Type The update copy mode set; Sync: Synchronous mode, Async: Asynchronous mode
Initial Copy The initial copy mode set; Entire: Copy all, None: Do not copy
Fence Level The fence level set (the condition that MCU rejects the write operation to the main
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Copy Pace The initial copy speed set (the number of tracks you can copy at a time)
Priority The priority of the initial copy operation set (scheduling order)
Diff The unit of the differential management set: Auto, Cylinder, Track
CFW Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not. Only M-VOL: Copy to main volume only is enabled.
Copy To R-VOL: Copy to main and remote volume is enabled
DFW Indicates whether DFW use to the remote volume is set or not. This value is output only
when the synchronous pair is created. When the asynchronous pair is created, a hyphen
(-) is output.
Not required: DFW not required, Required: DFW required
TS Indicates whether or not the host I/O time stamp is transferred to R-VOL when the pair
is created. This value is output only when the synchronous pair is created. When the
asynchronous pair is created, a hyphen (-) is output.
Enable: transferred, Disable: not transferred
CTG The consistency group number of the consistency group (CT group) that the created
pair belongs to. This value is output when the asynchronous pair is created only.
Error Level The error level set (handling if trouble occurs). This value is output when the asynchronous
pair is created only.
Volume: Volume (suspended by appropriate pair); Group: Group (suspended by
consistency group)
Result The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Num. of Pairs The number of created pairs
Table 256 (page 209).
Add Pair Operation 209