Resume-Pair Operation - HP XP20000/XP24000 Reference Manual

[{0x00,0x01,0x01,0x00:0x12:0x34,Normal end},{0x00,0x10,0x02,0x00:0x56:0x78,Normal end}],
Num. of Mirrors=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
R-Cmd.Dev.
R-Cmd.Dev. operation
Assign
Assign is selected as the parameter. The operation uses the following parameters as shown in
Table 278 (page
Table 278 Parameters for R-Cmd.Dev. Operation
Item
Assign
Release
Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)
Detailed information
Detailed information displays for this operation, as shown in
Table 279 R-Cmd.Dev. Operation
Item
LDKC
JNLG
MirrorID
Cmd.Dev.(LDKC:CU:LDEV)
Result
Num. of Mirrors

Resume-Pair Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],Resume-Pair,,Normal end,,,Seq.=xxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Priority,Range,
M-JNLG,R-JNLG,
Error Level,Resync Mode,Result}=
[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,7,Volume,0x02,0x00,Group,Normal,
Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,7,Group,0x02,0x00,Group,Normal,
Normal end}],
Num. of Pairs=2
[UR]
225).
Description
The remote command device is assigned.
The remote command device is released.
Table 279 (page
Description
The LDKC number that the journal group belongs
The journal group number
The mirror ID
The LDKC, CU, and LDEV numbers of the remote command
device
The hyphen (-) displays under the following conditions:
When assigning a remote command device without
specifying a remote command device as a parameter
When releasing a remote command device
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal
end
xxxx: Part code, yyyyy: Error code
The number of mirrors changed
225).
Resume-Pair Operation 225