Delete Cmd.dev Operation; Delete Ctg Operation; Delete Pair Operation - HP XP20000/XP24000 Reference Manual

TrueCopy for Mainframe function (for IBM z/OS)
Clear SIM
Clear Service Information Message (SIM) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)

Delete Cmd.Dev Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC z/OS(R)], Delete Cmd.Dev,,
Normal end,,,Seq.=xxxxx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Delete Cmd.Dev
Delete Command Device operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Serial number of log information (0000000000 to 4294967295)

Delete CTG Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Delete CTG,0x00:0x00,,Normal end, Seq.=xxxxxx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Delete CTG
Delete Consistency Group operation
0x00
The operation uses the following parameters, as shown in
Table 261 Parameters for Delete CTG Operation
Parameter
0x00:0x00
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)

Delete Pair Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Delete Pair,,Normal end,,,Seq.=xxxxxx
+{VOL(LDKC:CU:LDEV),PairVOL(LDEV),Type,Mode,Range,Result}=
-{0x00:0x00:0x00,0xFD,M-VOL,Normal,Group,Normal End},
{0x00:0x00:0x01,0xFE,M-VOL,Normal,Group,Normal End},
{0x00:0x00:0x02,0xFF,M-VOL,Normal,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC]
Description
The LDKC number and the consistency group (CT group) number of the consistency group
deleted.
LDKC number: 0x00 to 0x01, CT group number: 0x00 to 0x7F
Table 261 (page 213).
Delete Cmd.Dev Operation 213