System-Option Operation - HP XP20000/XP24000 Reference Manual

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 281 Suspend-Pair Operation
Item
P-VOL(LDKC:CU:LDEV)
S-VOL(LDKC:CU:LDEV)
MirrorID
S/N
CTRLID
Type
S-VOL Write
Range
Suspend Mode
Result
Num. of Pairs

System-Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR],System-Option,Normal end,,,Seq.=xxxxx
+Max Initial Copy=64
+{LDKC:CU,Change SIM Report}=[{0x00:0x00,Report},{0x00:0x01,Not Report},{0x00:0x02,
Not Report},(snip)
- (snip), {0x01:0xFE,,Report}],Num of CUs=510
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
System-Option
System-Option operation
Normal end
The operation has ended normally.
Description
The LDKC, CU, and LDEV numbers of the primary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is S-VOL.
The LDKC, CU, and LDEV numbers of the secondary data volume
If it is set by using a spreadsheet, N/A will be output for CU and LDEV numbers when
the Type is P-VOL.
The mirror ID
The serial number of the logical device (storage system)
The controller ID
N/A is output when CTRLID is set by using a spreadsheet.
Indicates whether the split data volume is a primary or secondary data volume
P-VOL: Primary, S-VOL: Secondary
Indicates whether writing to the secondary volume is enabled or not
Disable: Disabled, Enable: Enabled
The split range
Volume: Volume range, Group: Group range
The suspend mode
Purge: Purge mode, Flush: Flush mode
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of pairs
Table 281 (page 227).
System-Option Operation 227