HP XP20000/XP24000 Reference Manual page 14

2. Log on as a storage administrator and open the Remote Web Console main window.
3. Change to Modify mode.
4. Click Go-Security-Audit log Transfer in the menu bar of the Remote Web Console main window.
The Audit Log Transfer window displays. (see
5. Select one of the following:
If using a primary FTP server:
◦
◦
◦
◦
If using a secondary FTP server:
◦
◦
◦
◦
6. Click Apply. A confirmation message will display.
7. Click OK.
8. Confirm that the FTP server setting is correct, and then click Transfer and manually transfer
the audit log information file.
A message displays indicating that the transfer has completed.
There are cases, such as when an SVP is replaced, that will require the input of the configuration
in the Audit Log Transfer window again. Keep a list of the items you entered in the Audit Log
Transfer window, such as the IP address.
Follow the steps below to transfer the audit log information file from the SVP to the FTP server
manually.
1. Log on as a storage administrator and open the Remote Web Console main window.
2. Click Go – Security – Audit log Transfer in the menu bar of the Remote Web Console main
window. The Audit Log Transfer window (see
3. Click Audit Log Transfer in the Audit Log window.
A message displays indicating that the transfer has completed.
If you change the configuration in the Audit Log Transfer window (when the items set in the window
appear in blue italic letters), click Apply and apply the configuration in the window to the storage
system, and then click Transfer.
14 Introduction
Select Enable in Output to Primary Server.
Enter the IP Address in the Primary Server Setting. Do not enter the periods.
Enter the User ID and the Password you use to login the primary FTP server.
Enter the output folder where the audit log information file will be sent. Specify a
relative directory from the home directory as that folder.
Click Enable in Output to Secondary Server.
Enter the IP Address in the Secondary Server Setting. Do not enter the periods.
Enter the User ID and the Password you use to login the secondary FTP server.
Enter the output folder where the audit log information file will be sent. Specify a
relative directory from the home directory as that folder.
Figure 1 (page 15)).
Figure 1 (page 15)) displays.