HP XP20000/XP24000 Reference Manual page 121

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{DKA,Kind,Transfer Rate}=[{DKA-1AL,DKF 4MP,4},{DKA-1BL,DKF 4MP,4},{DKA-2ML,DKF 4MP,4},
{DKA-2NL,DKF 4MP,4}],Num. of DKAs=4
+{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1
+FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U,FSWR18-L,
FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U],Num. of FSWs=16
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-1,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-3,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x00,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-2,RAID5 (3D+1P),
DKR2F-J300FC,OPEN-V,-,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x10,OPEN-V,1688650752,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation,Encryption}={3-3,RAID1 (2D+2D),
DKR2F-J300FC,OPEN-V,3-1,Disable},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x01,OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+Num. of PGs=3
+{B4,SPARE,Drive Type}=[{3,1,DKR2F-J300FC}],Num. of SPAREs=1
This logged information indicates that the formatting was only requested, but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
[Install]
Install function
Install
Install operation
No parameter
No parameter is selected in the example above. This operation uses the following parameters, as
shown in Table 123 (page
Table 123 Parameters for Install Operation (Installing Additional Channel Adapters)
Parameter
Progress Close
Quick Format
Quick Format Close
NOTE: No parameters are selected for any case other than those described in this table.
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 124 Install Operation (Installing Additional Subsystems, ECC Groups or LDEVs)
Item Description
Disk Adapter (DKA) The Disk Adapter (DKA) mounting location
Kind The type of Disk Adapter (DKA)
Transfer Rate The transfer rate of Disk Adapters (DKA)
Num. of Disk The number of Disk Adapters (DKA)
Adapters (DKA)
Disk Unit (DKU) The mounting location of Disk Unit (DKU)
121).
Description
The progress window of LDEV format when LDEV is added
is closed.
Quick Format was selected when LDEV is added.
The progress window of preparing for Quick Format is
closed.
Table 124 (page 121).
Install Operation 121