Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
Tray ID set to unique value
for each enclosure
for each enclosure
for each enclosure
for each enclosure
Figure 59
Full Bus BCC Configuration Switch Settings
Segment 1 set to "1"
Segment 1 set to "1"
Segment 1 set to "1"
Segment 1 set to "1"
All other segments set to "0"
All other segments set to "0"
All other segments set to "0"
All other segments set to "0"
Segment 1 set to "1"
Segment 1 set to "1"
Segment 1 set to "1"
Segment 1 set to "1"
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Note inverted orientation from upper BCC
Attaching SCSI Cables and Configuring the Disk Enclosure Switches
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
Tray ID set to same value
on both BCCs
on both BCCs
on both BCCs
on both BCCs
155