To Delete A Library (Administrators Only) - HP StoreOnce B6000 Series User Manual

You can reduce the number of drives but, if you go to 0, the port setting will go to "No Port".
You cannot change the library type to a type that has a smaller set of maximum values (e.g.
number of cartridges) than is currently set.
1. Select the device in the list to display its details and then click on Edit.
IMPORTANT:
automatically reassign any drives that may now be configured incorrectly. A Warning is
displayed. For example, if you change from the default of FC Port 1&2 to a single FC port,
when the status shows ready and restarted, you must manually correct those drives that are
connected to the wrong port.
2. Amend details as appropriate and click Update to apply them. The information for the Interface
Information tab is generated automatically and changing it is not recommended.

To delete a library (administrators only)

Select the required device and then click on Delete in the Details section to delete it. You will be
prompted to confirm that this is what you wish to do.
WARNING!
deleted. It may take up to 15 minutes to delete all the files and free space on the HP StoreOnce
Backup System.
22 VTL (Virtual Tape Libraries)
Take care if you change the Port configuration because the system does not
All data on the device will be deleted. The library's deduplication store is also