Partner Appliances (Replication); Target Appliances Tab - HP StoreOnce B6000 Series User Manual

Partner Appliances (Replication)

The Partner Appliances tab shows you the replication status of all Target and Source HP StoreOnce
Backup Systems that have been configured for use with this HP StoreOnce Backup System.
There are three tabs; one for Target Appliances and one for Source Appliances, and a separate
tab for setting Source Appliance permissions.
Look at the bottom of the page to find information about any blackout windows that apply to the
selected appliance.

Target Appliances tab

The Target Appliances tab allows you to add, edit and remove Target Appliance details.
NOTE: Although you can add Target Appliances on this page, it is not necessary to do so before
mapping configurations because this option is also available when running the Replication wizard.
Summary Appliance details
The following status details are shown for both Target and Source appliances.
Table 21 Summary Appliance details
Appliance Name
Appliance Status
Appliance Address
Serial number
Free space
Online
Protocol version
62 Replication
The name of the appliance.
The health of the appliance; this shows you whether the appliance is running.
The virtual IP address of the appliance.
The serial number of the appliance.
The amount of free space on the appliance.
Whether the appliance is online.
The protocol of the appliance software.