The B6000 Management Console Via The Web - HP StoreOnce B6000 Series User Manual

The B6000 Management Console via the web

The B6000 Management Console is the main interface for:
Monitoring the status and health of the HP StoreOnce Backup System and all configured
backup devices
Creating and modifying VTL and NAS StoreOnce backup targets
Managing replication relationships and housekeeping
To run the B6000 Management Console
To log on using the B6000 Management Console, use any machine connected to the management
network. The HP StoreOnce Backup System uses a secure network connection.
Enter: https://<IP_address>
NOTE: If you use http: in the URL, you are automatically forwarded to the https: secure network
connection.
The B6000 Management Console displays the Login prompt.
NOTE: The web browser used to communicate with the StoreOnce Backup System must have
Active Scripting or JavaScript enabled. If it does not, some of the browser buttons may not be
displayed.
After a period of 15 minutes of user inactivity the session will time out and return to the Login
screen.
GUI components
The GUI display has the following sections:
System Status: This section shows you the last time the system was updated (this is the machine
time) and a count of event status categories over the last 24 hours. To view the individual
events for more detail, select Events from the Navigator.
Navigator: This displays the available GUI options and allows you to navigate to the
appropriate page.
Details: This is the main section of the page. When you first log on, this section shows the
top-level StoreOnce B6200 page. Once you select an item from the Navigator, it displays
the appropriate details for that item.
The B6000 Management Console via the web 9