HP StoreOnce B6000 Series User Manual page 63

Click on an appliance to view more detailed status information in the bottom half of the screen,
as described in the following table.
Table 22 Target appliance parameters
Target Appliance tab Some fields are editable.
Appliance Name This is the name that is used to identify the Target Appliance. You specify it on the Local
Appliance tab of the partner appliance.
Product Class The product class of the appliance, such as HP B6000.
Appliance Address This is the IP address of the Target Appliance. You specify it when you add the Target
Appliance and may edit it later.
Serial Number This is the serial number of the Target Appliance; it cannot be edited.
Command Protocol Port This is the port number that will be used for command protocol.
Number
Data Protocol Port This is the port number that will be used for data protocol.
Number
Available This field indicates whether the Target Appliance is available.
Replication protocol This identifies the replication protocol in use.
User Data Stored The amount of user data stored on the Target Appliance.
Capacity This shows the capacity of the Target Appliance.
Free Space This shows the amount of free space on the Target Appliance.
Software version This shows the software version of the Target Appliance.
System Time This shows the current system time.
Blackout window active This shows whether a blackout window is currently active. This means no replication will
occur.
Blackout windows Any blackout windows that have been specified will be reflected in this weekly calendar.
During these times, the selected Target Appliance is not available for replication.
Administrators may edit and delete blackout windows from here or from the Local Settings
tab.
To add a target appliance (administrators only)
1. Click Add Target Appliance.
Figure 2 Create new target appliance
2. Enter the Target Appliance Address.
Partner Appliances (Replication) 63