HP StoreOnce B6000 Series User Manual page 73

NOTE: When you select a Non-Replicating library, you will be able to run the Replication or
Recovering wizard.
Use the Replication wizard to create slot mappings for the non-replicating library; it becomes
a Source library. See
Use the Recovery wizard to recover cartridges from a Target Library. See
appliance, VTL devices
Table 26 Local library parameters
Name
Library Status
Replication role
User Data Stored
Size on disk
Mapped/Total Slots
Device Type
Longest Time out of Sync
Library Version
Replication status
Service set
Slot mappings
Select a local library to display slot mappings for that library.
Users with an Admin login may also remove a slot mapping by clicking on the Remove button.
Table 27 Slot mapping parameters
Replication-Source or Replication-Target library selected
Slot Mapping Name
Source/Target Appliance Name
Source/Target Appliance Address
Source/Target Appliance Online
Source/Target Appliance Serial Number
Source/Target Library Name
Source/Target Library Status
Time Out Of Sync
Blackout Window Active
Running the replication wizard (virtual tape devices)
for more information.
The name of the library, defined when the library device was created.
The status of the local library (such as online)
The role, which may be non replicating, replication-source or replication-target.
All library devices are initially non replicating, until slots have been configured
using this page.
The amount in GB of user data stored.
The amount of space used on the disk.
The number of slots that have been mapped out of the total number of slots
configured on the library device.
The emulation type configured for that library.
The longest time out of sync
The version number of the library.
Replication status, which may be Synchronised, Synchronising or Pending
Synchronisation.
The service set on which the library is configured.
This is the slot mapping name. Is it created when you run the wizard to define
the grouping of slots that you select.
The name of the Target Appliance to which cartridges will be replicated.
The IP address of the Target Appliance to which cartridges will be replicated.
This indicates whether a replication link is established with the partner
appliance.
The serial number of the Target Appliance to which cartridges will be
replicated.
The name of the library to which cartridges will be replicated on the Target
Appliance .
The status of the partner library (such as online).
Time in hours that replication has been out of sync.
This relates to the local appliance in its role as a source or target appliance.
No replication jobs will be started if the source or target appliance for a
for more information.
Recovering a source
VT Mappings (Replication) 73