Configuring Windows 95/98; Windows 95/98 Configuration - Ricoh Afico 180 Copy Reference Manual

You can use your printer as a network printer with Windows 95 and Windows
98 using the Multi Direct Print application, and TCP/IP or NetBEUI protocols.
This chapter explains how to configure your printer and Windows.

Configuring Windows 95/98

TCP/IP
NetBEUI
Preparation
The Multi Direct Print Application supports the TCP/IP protocol and the
NetBEUI protocol. Consult the network administrator before selecting the
protocol.
Limitation
When you use the NetBEUI protocol, you cannot print to a printer which is
located on the other side of a router.
Note
You can use both TCP/IP and NetBEUI protocols in a computer. To use both
protocols you must first install them.
1. Windows 95/98
Configuration
Basic Procedure
Selecting the protocol
TCP/IP
Assigning the IP address
Configuring Windows environment
Installing the Multi Direct Print
Installing the printer driver
Windows 95/98
Changing the port
NetBEUI
7