Ricoh Afico 180 Copy Reference Manual page 57

Copying
C
Lightly insert the copy paper face
down until the it stops. Adjust the
guides to copy paper size.
The k indicator on the display is
automatically selected.
2
3: Paper guide
Important
If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Note
Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When you set a OHP transpar-
encies, make sure that its front
and back faces are properly po-
sitioned.
D
Lower the paper hold lever.
40
When copying onto custom size
copy paper
Important
You should specify the size of
copy paper to avoid paper mis-
feeds.
If you select Standard or Custom
as the Paper Size setting, these
functions will remain in effect
even after Auto Clear or press-
ing the {Clear Modes} key. You
can alter this behavior by chang-
ing "12. Reset Bypass Set". See
P.80 "1. General Features
A Make sure the [Bypass] is se-
lected.
B Press the { { { { #} } } } key.
C Press the [Pap. Size] key.
D Select [Custom Size] with the
01 keys. Then press the
[Custom] key.
3
/ ".
4