Ricoh Afico 180 Copy Reference Manual page 279

NetWare Configuration
N
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (Step H-C), and in
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server" to highlight it, and
click [OK]. When you are using the NetWare 5, click "Print Sever (Non
NDPS)".
C In the [Print Server name] box, input the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step H-
3
A).
D Click [Define additional properties] to place ' mark, and click [Create].
O
Assign the printer to the created print server as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in the step L to high-
light it, and click [OK].
C In the [Printers] group, click the printer assigned in the step B to high-
light it, and click [Printer Number].
D Input the printer number and click [OK].
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step H-E).
E After confirming the settings, click [OK].
P
Start the print server by inputting as follows from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
44