Ricoh Afico 180 Copy Reference Manual page 202

Messages
Ready
Remove Paper Stan-
dard Tray
Remove Paper 1Bin
Tray
Replace Maintenance
Kit
Replace PCU
Reset PCU
Reset Fusing Unit Cor-
rectly
Resetting Job...
Reset Tray 1 Correctly
Reset Tray 2 Correctly
Warming Up...
Waiting...
Description
The printer is ready for print-
ing.
The standard output tray is
full.
The internal 1bin tray is full. Remove the paper from the
It is time to replace the parts
included in the Maintenance
Kit.
It is time to change the PCU. Call your sales or service
The photoconductor unit is
not installed in the printer.
The fusing unit is not set cor-
rectly.
Job is being reset.
Tray 1 is not set correctly.
Tray 2 is not set correctly.
The printer is now preparing
for printing.
Printer is waiting for the next
data to print.
Error & Status Messages on the Operation Panel
Resolution
—
Remove the paper from the
standard output tray
Important
Remove the paper from
the output tray before it
becomes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
internal 1bin tray.
Important
Remove the paper from
the output tray before it
becomes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
Call your sales or service
representative.
representative.
Call your sales or service
representative.
Set the fusing unit correctly.
Wait for a while.
Set tray 1 correctly.
Set tray 2 correctly.
Wait until the printer is
warmed up.
Wait for a while.
6
47