Ricoh Afico 180 Copy Reference Manual page 81

What to do If Something Goes Wrong
Problem
Parts of the image are not
copied.
Copies are blank.
Images are uneven or
blurred.
3
Images are light.
Images are dark.
The reverse side of an origi-
nal is copied.
A moire pattern is produced
on copies.
R
Tones are not reproduced
properly.
64
Cause
The original is not set correctly. Set originals correctly.
An improper paper size is
selected.
The original is not set correctly. Set originals correctly.
Copy paper was not stored
properly.
Black and white printed
originals
Original with designed
background.
Colored text originals
Black and white printed
originals
Original with designed
background.
Timetables or maps
Your original has dot pat-
tern image or many lines.
Printed photographs
Standard photographic
prints
Standard photographic
prints
Printed photographs
Action
P.27 "Setting Originals".
Select the proper paper size.
P.27 "Setting Originals".
Set papers on the Bypass
tray, and specify "Special"
for Pap. Type. P.42 "When
copying onto OHP transparen-
cies or thick paper"
Press the {Darker} key.
P.29 "Adjusting Copy Image
Density"
Press the {Darker} key.
P.29 "Adjusting Copy Image
Density"
Press the {Darker} key.
P.29 "Adjusting Copy Image
Density"
Press the {Lighter} key.
P.29 "Adjusting Copy Image
Density"
Press the {Lighter} key.
P.29 "Adjusting Copy Image
Density"
Specify "Sharp" for Text mode
in "08.Image Adjustment". Then
select the Text mode. P.79
"08.Image Adjustment"
Place the original on the ex-
posure glass at a sight angle.
Select the Photo mode.
Select the Text·Photo mode.
Specify "Glossy Photo" for
Photo mode in "08.Image
Adjustment". Then select the
Photo mode. P.79 "08.Im-
age Adjustment"
Select the Photo mode and
adjust the image density.