Ricoh Afico 180 Copy Reference Manual page 272

M
Assign print queues to the created printer as follows.
A In the [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in the Step L.
C Press {Insert} to select a queue serviced by the printer.
Note
You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
N
Press {Esc} until "Exit?" appears, and Select [Yes] to exit PCONSOLE.
O
Start the print server by inputting as follows from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
Note
If the printer works as configured, "Waiting for job" appears.
NetWare 3.x - Advanced Settings
3
37