Inserting, Removing The Sd Card; Opening The Cover - Panasonic Diga DMR-EH50 Operating Instructions Manual

Only insert or remove the SD card after turning the unit off.
When the card indicator ("SD") on the unit's display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
Opening the cover Inserting the card Removing the card Closing the cover
.o
o
o.
o
o
o
c_
U_
o
e_
Press down.
IpPress on the centre of the "} @ Press on the centre of
card until it clicks into J If you are using a
miniSD
TM
card, insert it the card.
lace.
into the mJnJSD
TM
cardr , '_ Q Pull it straight out.
adaptor that comes I/_ i _ ' "_ _
_ni_he [h;n_a[;m eve this _
adaptor from the unit.
Insert the card label up with
the cut-off corner on the right.
(Do not forget to close the cover. -,_ right)
oYou can use SD Memory Cards with capacities from 8 MB to 1 GB (-_ 11).
Push up.
oil you have an LCD/plasma television or LCD projector
Using progressive output, you can enjoy high-resolution video
recorded on media such as DVD-Video. Connect this unit's
component video output terminals to your television and turn on the
progressive output setting (-_ 16, 20).
oil you have a regular television (CRT: cathode ray tube)
Use component output with progressive "Off" (Factory setting -_ 57),
even if it is progressive compatible, because progressive output can
cause some flickering. This is the same for multi system televisions
using PAL mode.
COMPONENT
VIDEO IN
VIDEOIN
Progressive output
Progressive output
©© ©
COMPONENT
VIDEOOUT
J
COMPONENT
VIDEO OUT
RQT8027