Panasonic Diga DMR-EH50 Operating Instructions Manual page 47

iNPUT SELECT
mB
e.g., Connecting to the AV3 input terminals on the front
You can also connect to the AV4 input terminals on the rear.
oTurn off the unit and other video equipment before connecting.
This unit
Yellow White Red
S Video _ _A_udio/Video cable
._.a.b.le2...L. ...........
I
.................
Other video equipment
iConnect to AudioNideo output terminals.
If the audio output of the other equipment is monaural
Connect to L/MONO on the AV3 input terminals at the front.
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
• Press [HDD] or [DVD] to select the recording drive.
oWhen recording bilingual programmes
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
D I_Z_] FJ'_
Select either M 1 or M 2 on the connected equipment. (Only either
one type of M 1 or M 2 can be recorded.)
oWhen the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the SETUP menu (= 61).
This unit cannot record to discs containing both PAL and NTSC
signals. (However, both types of programmes can be recorded
onto the HDD.)
=To reduce noise in input from a video cassette recorder, set "AV-in
NR" to "On" in the on-screen menu (= 37).
2
3
4
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
Press [REC MODE] to select the
recording mode.
Start play on the other equipment.
When you want to start recording
Press [O REC].
Recording starts.
To skip unwanted parts
Press [I I] to pause recording. (Press again to restart recording.)
To stop recording
Press [m].
Almost all videos and DVD-Video on sale have been treated
to prevent illegal copying. Any software that has been so
treated cannot be recorded using this unit.
oUsing Flexible Recording (_ 24), you can save the content of a
video cassette (approx. 1-8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
O
m
o
o
RQT8027