Timer Recording; Using The Guide Plus+ System To Make Timer Recordings; Using Showview Number To Make Timer Recordings; The Unit's Display - Panasonic Diga DMR-EH50 Operating Instructions Manual

o
buttons
ENTER
EXT LINK
REC MODE
2
3
GUIDE
_) TIMER
• 1_i _ _ When recording bilingual broadcasts, only the
audio selected in "Bilingual Audio Selection" (-_ 56) is recorded
("M 1" or "M 2").
• I_T_;11 If you set "Rec for High Speed dubbing" to "On" before
recording to the HDD, you can later high speed transfer (dub) the
programme to DVD-R, DVD-RW (DVD-Video format) and +R.
Before recording
• Refer to the "Using DVD-R, DVD-RW and +R on this unit" for more
information (-_ 7).
• See also the notes "Before recording" (-_ 23).
Preparation
• Turn on the television and select the appropriate video input to suit
the connections to this unit.
• If recording to DVD, insert a disc that you can use for recording
(-- 22).
• Make sure that the clock settings are correct (-_ 60).
You can perform timer recordings by simply selecting the desired
programme from the television programme list.
Entering SHOWVIEWnumbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers or magazines.
• You can enter up to 32 programmes up to a month in advance.
1
Press [ShowView].
4
Before using the GUIDE Plus+ system
• The television programme list is not displayed immediately after
purchasing this unit.
• You must complete initial setup for the GUIDE Plus+ system.
Refer to the "User's manual for the GUIDE Plus+ system" for more
information.
Press [GUIDE].
The GUIDE Plus+ programme overview is displayed.
(_ User's manual for the GUIDE Plus+ system)
5
Press the numbered buttons to enter
the SHOWVIEW number.
Press [4] to move back to correct a digit.
Press [ENTER].
TIt_ER Rer_air_ HDD 3024SP DVD 1:5_SP
BECOBDI_G _2:_4:_
• Confirm the programme and make corrections if necessary
using [A y, "4, I_] (_ 28, step 3).
• When "-- ---" appears in the "Name" column, you cannot set
timer recording. Press [&, Y] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit's memory.
• You can also press [HDD] or [DVD] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" (-_ 27, Relief Recording).
• You can also press [REC MODE] to change the recording
mode.
• VPS/PDC (" 27)
ON--OFF (- - -)
• RENEW (Auto Renewal Recording) _ (-, 28)
ON--OFF
• Programme Name
Press ['4, I_] to select "Programme Name" and press
[ENTER] (-, 53, Entering text).
Press [ENTER].
The settings are stored.
TIMER Remair_ HDD 3024SP DVD 158SP
BECORDI_I_ 12;_s:e_ Is. 7. TUE
Repeat steps 1-4 to programme other recordings.
Press [¢ TIMER].
The unit turns off and "_)" lights on the unit's display to
indicate timer recording standby has been activated.
olf you turn on the unit, a
message screen appears.
Recording is not possible
while timer recording is in standby. [Playback is possible
however you cannot play a title recorded using a different
encoding system (PAL or NTSC) from that of the TV system
currently selected on the unit.]
If "NTSC" has been selected for "TV System" (_ 61), the GUIDE
RQT8027 Plus+ system cannot be used.