Playing While You Are Recording; Direct Tv Recording; Recording From Digital/Satellite Receiver Or Decoder - Panasonic Diga DMR-EH50 Operating Instructions Manual

nr_'a i'_m
Playing from the beginning of the title you are
recording--Chasing playback
Press [1_] (PLAY) during recording.
oThere is no sound output while searching forward or backward.
To stop play
Press [Ill.
To stop recording
2 seconds after play stops
Press [m].
To stop timer recording
Press [_ TIMER].
oYeu can also press and hold [el on the main unit for more than 3
seconds to stop recording.
Playing a title previously recorded while recording--
Simultaneous rec and play
oYou can also change the drive and play while recording. Press
[HDD] or [DVD].
1
Press [DIRECT NAVIGATOR] during
recording.
2
Press [&, I', _I, I_] to select a title
and press [ENTER].
oThere is no sound output while searching forward or backward.
To stop play
Press [m].
To exit the Direct Navigator screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1 Press [DIRECT NAVIGATOR] to exit screen.
2 If the recording is on the other drive
Press [HDD] or [DVD] to select the recording drive.
3 Press [m].
To stop timer recording
Press [G TIMER].
oYou can also press and hold [1] on the main unit for more than 3
seconds to stop recording.
Reviewing the recorded images while recording--
Time Slip
While recording, you can play a scene in the title being recorded or a
previously recorded title. Both the images being played and recorded
are shown.
1
Press [TIME SLIP] during recording.
2
.,_, /_ Play starts from 30
secondsprevieus
The image currently being
I _--_,,_-_ recorded
oYou will hear the playback audio.
Press [A, T] to select the time and
press [ENTER].
oEach time you press [A, Y], the time increases [A] or
decreases [Y] by 1 minute.
(Press and hold for 10-minute intervals.)
oPress [TIME SLIP] to show the play images in full. Press
again to show the play and recording images.
To stop play
Press [m].
To stop recording
2 seconds after play stops
Press [m].
To stop timer recording
Press [_3 TIMER].
oYou can also press and hold [1] on the main unit for more than 3
seconds to stop recording.
Chasing play can only be used with programmes of the same
encoding system (PAL/NTSC).
When connected to a television that has the Q Link
function using a fully wired 21-pin Scart cable.
This function allows you to immediately start recording the
programme that you are viewing on the TV.
1
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
If you selected the DVD drive
Insert a disc. (-_ 22)
3
Press and hold [O DIRECT TV REC]
for I second.
Recording starts.
To stop recording
Press [m].
Preparation
=Connect a satellite/digital receiver or decoder to this unit's input
terminals (=_17).
oWhen recording bilingual programmes
iw'a iv_l
When both M 1 and M 2 is selected on the connected equipment,
you can select the audio type in playback.
Select either M 1 or M 2 on the connected equipment. (Only either
one type of M 1 or M 2 can be recorded.)
oWhen the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the SETUP menu (= 61).
This unit cannot record to discs containing both PAL and NTSC
signals. (However, both types of programmes can be recorded
onto the HDD.)
• Press [HDD] or [DVD] to select the recording drive.
While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
e.g.,If you have connected to AV2 input terminals, select "AV2".
2
Press [REC MODE] to select the
recording mode.
3
Select the channel on the other
equipment.
4
Press [O REC].
Recording starts.
To skip unwanted parts
Press [I I] to pause recording. (Press again to restart recording.)
To stop recording
Press [m].
e}
_o
.o
o
RQT8027