Media Handling (Disc/Usb Memory/Sd Card); Inserting Discs; Inserting/Removing The Usb Memory; Inserting/Removing The Sd Card [Ex89] - Panasonic Diga DMR-EX89EB Operating Instructions Manual

Media Handling (Disc/USB Memory/SD Card)

Instructions/notes regarding SD cards and SD drive are applicable to the DMR-EX89 model only.

Inserting Discs

 Press [ OPEN/CLOSE] to open the tray.
– Insert a disc.
Insert label-up.
Cartridge disc
Insert label-up with the arrow
facing in.
Insert fully.
 Press [ OPEN/CLOSE] to close tray.
Notes
 When using 8 cm DVD-RAM or 8 cm DVD-R, remove the
disc from the cartridge.
 It is not possible to record or play continuously from one
side of a double sided disc to the other. You will need to
eject the disc and turn it over.
Automatic drive select function
[RAM] [Only for discs with the write-protect tab on the cartridge set to
"PROTECT" ( 68, Setting Protection)]
[DVD-V] [VCD]
 If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
 If you eject a disc and close the disc tray, the HDD drive is
automatically selected.

Inserting/Removing the USB memory

Inserting the USB memory
 Before inserting any USB memory to this unit, ensure that the data
stored therein has been backed up.
 Check the orientation of the USB connector and insert it straight in.
 Insert an USB device while the unit is stopped, so the "USB device"
screen is displayed. Select an item, then press [OK] to switch to the
USB-related operations ( 38, 63).
Removing the USB memory
 Complete all USB-related operations and pull the USB memory
straight out.
 If a USB memory being accessed is pulled out, then the data may be
damaged.
Inserting/Removing the SD Card
When the SD card slot indicator ("SD") on the unit's display is
fl ashing, the card is being read from or written to. Do not turn off the
unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
 Inserting foreign objects can cause a malfunction.
Inserting the card
Press on the centre of
the card until it clicks
into place.
Insert the card label up with
the cut-off corner on the
right.
Removing the card

Disc and Card Care

[RAM] Use cartridges to protect them from scratches and dirt.
Holding a disc or card
Handle discs by the edges to avoid inadvertently scratching or getting
oil from your fi ngers on the disc. Do not touch the signal surface of
discs (the shiny side) or the terminal surface (the metal part) of SD
cards.
Cleaning discs or cards
Discs are not indestructible and occasionally dirt or condensation
may appear. Clean by gently wiping with a soft, dry lint-free cloth in a
straight line from the centre of the disc to the edge of the disc.
Return discs and SD cards to their cases when not in use; this helps
to protect against scratches and dirt.
Storing discs and cards
 Do not place or store discs and cards in the following locations:
– Direct sunlight
– Very dusty or humid areas
– Near a heat source
– Places that undergo extreme shifts in temperature (condensation
can occur)
– Where static electricity or electromagnetic waves occur
 Keep the Memory Card out of reach of children to prevent
swallowing.
Discs to avoid
 Discs that are not perfectly circular in shape
 Warped discs, which may not balance properly in your unit, causing
improper operation or damage to the unit
 Cracked discs
 Discs with exposed adhesive (from removed stickers or labels, such
as may occur with rental discs or improperly cared-for discs that
were previously labeled or re-labeled)
[EX89]
If you are using e.g.,
a miniSD card, a miniSD
miniSDHC card, a
microSD card or a
microSDHC card,
ADAPTER
insert it into the adaptor
that comes with the
card.
Insert and remove this
adaptor from the unit.
Press on the centre
of the card.
Pull it straight out.
81
RQT9463