Disc And Card Handling; Unit Care; How To Hold A Disc Or Card; Handling Precautions - Panasonic Diga DMR-EH50 Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EH50:
Table of Contents

Advertisement

• How to hold a disc or card
Do not touch the recorded surface or the terminal surface.
• Concerning non-cartridge discs
Be careful about scratches and dirt.
• If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
• Handling precautions
aDo not attach labels or stickers to discs. (This may cause disc
warping and un-balanced
rotation, rendering it unusable.)
oWrite on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
aDo not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
• Do not use scratch-proof
protectors or covers.
aDo not expose the terminals of the card to water, garbage or other
strange things.
• Do not drop stack, or impact discs. Do not place objects on them.
aDo not use the following discs:
-Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
-Discs that are badly warped or cracked.
-Irregularly
shaped discs, such as heart
shapes.
aDo not place in the following areas:
-In direct sunlight.
-In very dusty or humid areas.
-Near a heater.
-Locations
susceptible to significant difference in temperature
(condensation
can occur).
-Where
static electricity or electromagnetic
waves occur.
oTo protect discs from scratches and dirt, return them to their cases
or cartridges when you are not using them.
The manufacturer
accepts no responsibility
and offers no compensation
for loss of recorded or edited material due to a problem
with the unit or recordable media, and accepts no responsibility
and offers no compensation
for any subsequent
damage caused by
such loss.
Examples of causes of such losses are
• A disc recorded and edited with this unit is played in a DVD Recorder or computer disc drive manufactured
by another company.
• A disc used as described above and then played again in this unit.
• A disc recorded and edited with a DVD Recorder or computer disc drive manufactured
by another company is played in this unit.
,,,=
4=
The precision parts in this unit are readily affected by the
environment,
especially temperature,
humidity, and dust.
Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
oNever use alcohol, paint thinner or benzine to clean this unit.
oBefore using chemically treated cloth, carefully read the
instructions
that came with the cloth.
Observe the following points to ensure continued listening
and
viewing pleasure.
Dust and dirt may adhere to the unit's lens over time, making it
impossible to record or play discs.
Use the DVD-RAM lens cleaner about once every year, depending
on frequency of use and the operating environment.
Carefully
read
the lens cleaner's instructions before use.
Lens cleaner: LF-K123LCA1
or RP-CL720 (On sale from May
2005)
Do not obstruct the rear panel's internal cooling fan.
RQT8027

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents