Panasonic Diga DMR-EH50 Operating Instructions Manual page 66

Recording, timer recording and transferring (dubbing) Page
O
O
RQT8027
Cannot record from external
equipment.
Timer recording does not stop
even when [i] is pressed.
A part or whole of a recorded
title has been lost.
Cannot transfer (dub) to a DVD-
R, etc. disc using the high speed
mode.
An unusually loud sound is
coming from the rotating DVD-R,
etc.
Play
Audio and video momentarily
pause.
oCheck that the connection is correct.
eSelect the input channel ("AV2", "AV3" or "AV4") for the equipment you have connected.
oWhile using timer recording, press [(_ TIMER]. ("_)" disappears.)
eWhen using the linked timer recording with external equipment, press [EXT LINK]. ("Ext Link"
disappears.)
• If you start recording immediately after turning on the unit while "Quick Start" is set to "On",
you cannot then stop recording for a few seconds.
• If there is a power failure or the plug is disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc may become unusable.
You will have to format the disc (l_Ti_l _ _) or use a new disc. We cannot offer any
guarantee regarding lost programmes or discs.
• When recording to the HDD, set "Rec for High Speed dubbing" to "On" in the SETUP menu.
• When recording or high speed transferring (dubbing) to a DVD-R, DVD-RW (DVD-Video
format) and +R, the sound of the disc rotating may be louder than normal, however, this is not
a problem.
• This occurs between playlist chapters.
• This occurs between chapters and with partially deleted titles on finalized DVD-R, DVD-RW
(DVD-Video format) and +R that have been transferred (dubbed) using the high speed mode.
• This occurs as scenes change during Quick View.
;i;i;i;i;i;i;i;i;i;i;i;i;i!_!!_iiiii!!i!i!i ¸
15, 16,
17, 47
26-28
29
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
51
24
iiiiiiiiiiiiiiiiiiiiiii
i!_iiiiiiiiii!ili_iiiiiiiiiiiiiiiiiiii _
iiiiiiii!!iiiiiiiii_iiiiiiiiiiiiiiiiii!ii_i
m
m
Continued on the next page