Recording Television Programmes - Panasonic Diga DMR-EH50 Operating Instructions Manual

Hide thumbs Also See for Diga DMR-EH50:
Table of Contents

Advertisement

o
RQT8027
2
5
1
mB
AUDmO
4
oYou can record up to 500 titles on HDD. (When continuously
recording for long durations, titles are automatically divided every 8
hours.)
eYou can record up to 99 titles on one disc.
eYou can record up to 49 titles on one disc.
elt is not possible to record onto a card.
See also the notes "Before
recording"
(= 23).
Preparation
=Turn on the television and select the appropriate
video input to suit
the connections
to this unit.
=Turn on this unit.
2
Press [HDD] or [DVD] to select the
recording drive.
The HDD or DVD indicator lights up on the unit.
If you selected the DVD drive
Press [_ OPEN/CLOSE]
on the main
unit to open the tray and insert a disc.
=Press the button again to close the tray.
oWhen using 8 cm DVD-RAM, or 8 cm DVD-R, remove the
disc from the cartridge.
Insert label-up.
Cartridge
disc
Insert with the
arrow facing in.
Insert fully so it clicks into place.
3
Press [^ v CH] to select the channel.
4
5
To select with the numbered buttons:
e.g.,
5:
[0] _ [5]
15:
[1] -- [5]
Press [REC MODE] to select the
recording
mode
(XP, SP, LP or EP).
Remaining time
the disc
oTo record sound using LPCM (XP mode only):
Set the "Audio Mode for XP Recording" to "LPCM" in the
SETUP menu (-_ 56).
Press [O REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
oYou cannot change the channel or recording mode during
recording. You can change the channel or recording mode
while paused; however, the recording will then be as a
separate title.
olTl'd_l _
You can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
• To pause recording
Press [! 1].
Press again to restart recording.
You can also press [Q REC] to restart.
(Title is not split into separate titles.)
• To stop recording
Press [1].
=From the start to the end of the recording is called one title.
el_'.i _
_
It takes about 30 seconds for the unit to complete
recording management
information after recording finishes.
If a station
broadcasts
Teletext
information
The unit automatically
records the programme's
and station's name
if the station's Title Page is correctly set (_ 58).
The unit may take some time in retrieving titles (up to 30 minutes)
and may fail in some cases.
Quick Start (m 57)
1 Sec. Quick Start for Recording
& EPG Display
From the power on, recording starts in about 1 second
after
the REC button is pressed. If the GUIDE button is pressed
while the unit is off, the Electronic Program Guide (EPG)
displays in less than 1 second. (Quick Start Mode)
<_Onlywhen recording to the HDD or DVD-RAM
"Quick Start" is set to "On" at the time of purchase.
Startup takes up to a minute when:
-You play a disc or start recording to discs other than DVD-
RAM.
-You want to make other operations.
-The clock has not been set.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents