Table of Contents
Advertisement
Media Handling
Inserting Discs
1 Press [< OPEN/CLOSE] to open the tray.
– Insert a disc.
2 Press [< OPEN/CLOSE] to close tray.
Notes
≥ Ensure that the disc is flat in the tray.
≥ When using DVD-RAM or DVD-R, remove the disc from the
cartridge. Cartridge discs cannot be used.
≥ It is not possible to record or play continuously from one
side of a double sided disc to the other. You will need to
eject the disc and turn it over.
Automatic drive select function
[DVD-V] [VCD]
≥ If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
≥ If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
Inserting/Removing the USB memory
Inserting the USB memory
≥ Before inserting any USB memory to this unit, ensure that the
data stored therein has been backed up.
≥ Check the orientation of the USB connector and insert it
straight in.
≥ Insert an USB device while the unit is stopped, so the "USB
device" screen is displayed. Select an item, then press [OK]
to switch to the USB-related operations (
Removing the USB memory
≥ Complete all USB-related operations and pull the USB
memory straight out.
≥ If a USB memory being accessed is pulled out, then the data
may be damaged.
Insert label-up.
42, 71).
Inserting/Removing the SD Card
When the SD card slot indicator ("SD") on the unit's display is
flashing, the card is being read from or written to. Do not turn off
the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
≥ Inserting foreign objects can cause a malfunction.
Inserting the card
If you are using a
miniSD card, a
Press on the centre
miniSDHC card, a
of the card until it
microSD card or a
clicks into place.
microSDHC card,
insert it into the
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with
the cut-off corner on the right.
Removing the card
Press on the centre of the card.
Pull it straight out.
Inserting a video cassette
Insert a video cassette.
(The surface on which you can see a roll of tape should face up.)
The unit is automatically turned on.
To eject:
From the main unit
≥ Press [< EJECT] on the main unit.
From the remote control
≥ Press [DRIVE SELECT] to select VHS drive and then press
and hold [∫] for about 3 or more seconds.
Video Cassette Information
Video cassettes
≥ Break off the video cassette's tab to
prevent accidental erasure.
Cover the hole with a double layer of
adhesive tape when you want to use the
video cassette for recording again.
≥ You can use video cassettes with the
VHS and S-VHS marks, but the unit is
unable to make full use of the
characteristics of S-VHS video
cassettes.
Video cassette care
≥ Poor quality or damaged video cassettes can cause the heads to
become dirty and malfunction. Store your video cassettes
carefully and discard them when they become dirty or damaged.
≥ Never use video cassettes on which juice has been spilled or those
that are extremely damaged since this will not only cause the
heads to become dirty, but will also make the unit malfunction.
e.g.,
miniSD
ADAPTER
Tab
89
VQT2J45
Hide quick links:
Advertisement
Table of Contents
