Picture And Folder Operation - Panasonic Diga DMR-EH50 Operating Instructions Manual

e}
U.I
_iii_ iiiiii!!i
SD
mB
DVD,
RETURN
oYou can use SD Memory Cards with capacities from 8 MB to 1 GB
(-- 11).
Preparation
oPress [HDD], [DVD] or [SD] to select the drive.
o1_;11 _ Release protection (_ 50, Setting the protection).
1
Press [DIRECT NAVIGATOR].
2
Press the "Green" button to select
"PICTURE".
3
Press [A, I', "4, I_] to select the still
picture.
4
=To select the still pictures in another folder (=. 35)
Press [SUB MENU], then [&, I _] to
select the operation and press
[ENTER].
below
I Editing titles/chapters and playing
chapters -, 38, step 2
• To edit still picture folders
In step 3 (= above)
_1_Press [A, Y, _1, I_] to select "Folder"
and press [ENTER].
(_} Press [A y] to select the folder.
oTo show other pages/Multiple editing
(_ above)
@ Press [SUB MENU], then [&, Y] to To switch to another
select the operation and press [ENTER]. higher folder = 35
To return to the previous screen
Press [RETURN].
To exit the screen
Press [DIRECT NAVIGATOR].
After performing steps 1-4
Press [,4, I_] to select "Erase" and press [ENTER].
eOnce erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
oWhen erasing a folder, the files not containing still pictures will also be erased if they are inside the folder.
iii
RQT8027
_
Multiple editing is possible.
(This does not apply to folders under the folder concerned.)
You can give names to still picture folders.
53, Entering text
oFolder names input using this unit may not be displayed on other equipment.
If set, this will protect the still picture or folder from accidental erasure. D_REc'r NAWGATOR Pl_
Press [,4, I_] to select "Yes" and press [ENTER]. r-_ s_cAR_
The lock symbol appears when the still picture or folder is protected.
eEven if the protection setting is used by this unit to protect a folder, the folder may
be erased by another unit.
You can select a whole folder or individual pictures for printing and specify the number of prints to be made.
Press [,4, I_] to select number of print (0 to 9) and
press [ENTER]. _ _
The DPOF mark appears. (This appears on the still pictures inside a folder when you make the
DPOF setting for the folder.)
To cancel the print setting DPOF
Set the number of print to "0".
oPrint settings (DPOF) made using this unit may not be viewable on other equipment.
oWhen this is set by this unit, any settings established by other units will be released.
oSettings cannot be made for folders and files not in accordance with DCF standards or if there is no
remaining space on the card.