Functions Window; Status Messages - Panasonic Diga DMR-EH50 Operating Instructions Manual

I Picture menu--Change the picture quality ]
Playback NR
Reduces noise and picture degradation.
Progressive _ (-_ 68)
Select "On" to enable progressive output.
Select "Off" if the picture is stretched horizontally.
Transfer <_ [When "Progressive" (_ above) is set to "On".]
Select the method of conversion for progressive output to suit
the type of title being played (_ 68, Film and video).
When the output signal is PAL
oAuto: Detects 25 frame-per-second film content and
appropriately converts it.
oVideo: Select when using "Auto", and the video
content is distorted.
When the output signal is NTSC
=Auto1
(normal):
oAuto2:
oVideo:
Detects 24 frame-per-second film content and
appropriately converts it.
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
Select when using "Auto1" and "Auto2", and
the video content is distorted.
AV-in NR (Only when AV1, AV2, AV3 or AV4 is selected)
Reduces video tape noise while transferring (dubbing).
oAutomatic: Noise reduction only works on picture input
from a video tape.
oOn: Noise reduction works for input video.
=Off: Noise reduction is off. You can record the input
signal as it is.
Only when you have set "Progressive" to "On" in the SETUP menu
('_ 20).
I Sound menu--Change the sound effect ]
V.S.S.
(Dolby Digital, MPEG, 2-channel or over only)
Enjoy a surround-like effect if you are using two front speakers
only.
=Turn V.S.S. off if it causes distortion. (Check the surround
function on the connected equipment.)
=V.S.S. does not work for bilingual recordings.
Dialog Enhancer
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
I Other menu--Change the display position ]
Position
1-5: The higher the setting the lower the on-screen menu
moves.
By using the FUNCTIONS window you may access the main
functions quickly and easily.
While stopped
Press [FUNCTIONS].
Functions displayed depend on the selected drive or type of
disc.
2
Press [A, I'] to select an item and
press [ENTER].
elf you select "To Others" and press [ENTER], the following
screen appears.
olf you select "Return" and press [ENTER], you can return to
the previous screen.
To exit the FUNCTIONS window
Press [FUNCTIONS].
Press [STATUS].
The display changes each time you press the button.
HDD t Selected drive/type of disc
Recording or play status/input channel
audio type being received (-_ below)
audio type
__ Recording drive/
Transfer (dubbing) progress indicator
Date and time
Title number and elapsed time during play/
Recording mode Available recording time and
recording mode
Title number and elapsed time during
recording/Recording mode
No display
oTV audio type
STEREO: STEREO/NICAM stereo broadcast
M I/M 2: Bilingual/NICAM dual-sound broadcast
M 1:NICAM monaural broadcast
e}
e}
U}
O
£}
o
.£
RQT8027