Inserting, Removing The Sd Card; Note To Owners Of Progressive Compatible Pal System Televisions - Panasonic Diga DMR-EH50 Operating Instructions Manual

Inserting, Removing the SD card

Only insert or remove the SD card after turning the unit off.
When the card indicator ("SD") on the unit's display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
Opening the cover
Press down.
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (

Note to owners of progressive compatible PAL system televisions

≥If you have an LCD/plasma television or LCD projector
Using progressive output, you can enjoy high-resolution video
recorded on media such as DVD-Video. Connect this unit's
component video output terminals to your television and turn on the
progressive output setting (
RQT8027
6
Inserting the card
Press on the centre of the
If you are using a
card until it clicks into
miniSD
place.
into the miniSD
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with
the cut-off corner on the right.
(Do not forget to close the cover.
16, 20).
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO OUT
Removing the card
1
TM
card, insert it
2
TM card
ADAPTER
right)
11).
≥If you have a regular television (CRT: cathode ray tube)
Use component output with progressive "Off" (Factory setting
even if it is progressive compatible, because progressive output can
cause some flickering. This is the same for multi system televisions
using PAL mode.
Closing the cover
Push up.
Press on the centre of
the card.
Pull it straight out.
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO OUT
57),