Sharp FO-IS115N Operation Manual page 145

POLLING
If you wish to use a Rapid Key as a polling key, press
press the Rapid Key that you wish to use (any Rapid Key not
already in use), and then press
If you do not wish to use the polling function, press
Note: When a Rapid Key is used as the polling key, it cannot be
used for Rapid Key Dialling.
Initial setting: NO
AUTO PRINT
Press
OUT
Activity Report once every 40 send/receive operations. (The
report can still be printed manually at any time.) Press
to turn off Auto Print Out.
Initial setting: NO
ECM MODE
Press
noise on the telephone line automatically corrected before print-
out at the receiving end. This is only effective when the other
machine has ECM as well. Press
(When there is considerable noise on the line, you may find that
ECM slows transmission. Turning off ECM mode may increase
transmission speed.)
Initial setting: YES
DIAL TONE
Press
DETECTION
dial tone on the line before automatic dialling. Press
turn this function off.
Note: If you select YES and find that the machine is unable to dial,
change the setting to NO.
Initial setting: NO
KEY TONE
Press
key is pressed on the operation panel (this confirms that the key
has been correctly pressed). Press
sound.
Initial setting: ON
(YES) to have the machine automatically print an
(YES) to have any distortions in a transmission due to
(YES) to have the machine verify the presence of a
(ON) to have the machine sound a beep each time a
Option Settings
START
.
(NO) to turn off ECM mode.
(OFF) to turn off the beep
(YES),
(NO).
(NO)
(NO) to
141